Teekay® Axilock Type IV EPDM

Teekay Axilock
(axially restrained)

The Teekay Axilock has two metallic anchor rings that dig into the pipe wall when the coupling is installed. This prevents the two pipes from pushing apart under pressure or pulling away under end-load.

Each coupling (whether Axilock or Axiflex) consists of a casing, a gasket and a lockpart. The purpose of the casing is to house the gasket and to press it onto the pipe surface when the lockpart is closed. The lockpart is designed to pull the two ends of the casing together circumferentially around the pipe. In order to achieve this, the coupling is labelled clearly with a torque figure which ensures that the gasket is compressed sufficiently against the pipe surface.

The Axilock has two anchor rings which are placed adjacent to, but separate from, the sealing mechanism. As the lockpart is tightened the sealing lips are pressed against the pipe surface to form a seal. At the same time the anchor rings penetrate the rubber, bite into the two pipes and prevent them from pulling apart, whether by external loading or internal pressure. The end seal is also pressed against the pipe surface, which protects both the anchor ring and the section of the pipe where the anchor rings have bitten, from any possible external corrosion.

Type I
Casing: AISI 304 / DIN 1.4301
Fasteners: Alloy Steel, Coated
Gasket: EPDM/NBR/H-NBR/FKM/VMQ

Type IV
Casing: AISI 316L / DIN 1.4404
Fasteners: AISI 316 / 316L
Gasket: EPDM/NBR/H-NBR/FKM/VMQ

Article nr.Description
0004247AXILOCK TYPE IV EPDM RVS 316 21,3 MM
0003815AXILOCK TYPE IV EPDM RVS 316 25 MM
0002645AXILOCK TYPE IV EPDM RVS 316 26,90 MM
0003415AXILOCK TYPE IV EPDM RVS 316 28 MM
0002528AXILOCK TYPE IV EPDM RVS 316 30 MM
0003816AXILOCK TYPE IV EPDM RVS 316 32 MM
0002529AXILOCK TYPE IV EPDM RVS 316 33,70 MM
0002530AXILOCK TYPE IV EPDM RVS 316 38 MM
0002977AXILOCK TYPE IV EPDM RVS 316 40 MM
0002531AXILOCK TYPE IV EPDM RVS 316 42,4 MM
0002532AXILOCK TYPE IV EPDM RVS 316 44,5 MM
0002533AXILOCK TYPE IV EPDM RVS 316 48,3 MM
0002789AXILOCK TYPE IV EPDM RVS 316 50 MM
0002620AXILOCK TYPE IV EPDM RVS 316 54 MM
0004079AXILOCK TYPE IV EPDM RVS 316 55 MM
0002534AXILOCK TYPE IV EPDM RVS 316 57 MM
0002978AXILOCK TYPE IV EPDM RVS 316 60 MM
0002535AXILOCK TYPE IV EPDM RVS 316 60,3 MM
0002918AXILOCK TYPE IV EPDM RVS 316 63 MM
0002647AXILOCK TYPE IV EPDM RVS 316 67 MM
0002675AXILOCK TYPE IV EPDM RVS 316 70 MM
0002536AXILOCK TYPE IV EPDM RVS 316 73 MM
0002537AXILOCK TYPE IV EPDM RVS 316 76,1 MM
0003437AXILOCK TYPE IV EPDM RVS 316 84 MM
0002538AXILOCK TYPE IV EPDM RVS 316 88,9 MM
0003238AXILOCK TYPE IV EPDM RVS 316 98 MM
0003699AXILOCK TYPE IV EPDM RVS 316 100 MM
0002892AXILOCK TYPE IV EPDM RVS 316 101,6 MM
0002652AXILOCK TYPE IV EPDM RVS 316 104 MM
0002539AXILOCK TYPE IV EPDM RVS 316 108 MM
0002540AXILOCK TYPE IV EPDM RVS 316 114,3 MM
0003221AXILOCK TYPE IV EPDM RVS 316 129 MM
0002541AXILOCK TYPE IV EPDM RVS 316 139,7 MM
0003457AXILOCK TYPE IV EPDM RVS 316 141,3 MM
0003416AXILOCK TYPE IV EPDM RVS 316 154 MM
0002701AXILOCK TYPE IV EPDM RVS 316 159 MM
0003590AXILOCK TYPE IV EPDM RVS 316 165 MM
0002542AXILOCK TYPE IV EPDM RVS 316 168,3 MM
0004128AXILOCK TYPE IV EPDM RVS 316 180 MM
0002797AXILOCK TYPE IV EPDM RVS 316 200 MM
0002874AXILOCK TYPE IV EPDM RVS 316 204 MM
0002543AXILOCK TYPE IV EPDM RVS 316 219,1 MM
0003264AXILOCK TYPE IV EPDM RVS 316 250 MM
0002723AXILOCK TYPE IV EPDM RVS 316 254 MM
0002812AXILOCK TYPE IV EPDM RVS 316 256 MM
0003711AXILOCK TYPE IV EPDM RVS 316 260 MM
0002824AXILOCK TYPE IV EPDM RVS 316 267 MM
0003521AXILOCK TYPE IV EPDM RVS 316 267 MM
0002780AXILOCK TYPE IV EPDM RVS 316 273 MM
0003417AXILOCK TYPE IV EPDM RVS 316 304 MM
0003196AXILOCK TYPE IV EPDM RVS 316 323,9 MM
0002825AXILOCK TYPE IV EPDM RVS 316 323,90 MM
0003529AXILOCK TYPE IV EPDM RVS 316 355,6 MM
0002840AXILOCK TYPE IV EPDM RVS 316 355,60 MM
0003030AXILOCK TYPE IV EPDM RVS 316 368,00 MM
0003607AXILOCK TYPE IV EPDM RVS 316 406,4 MM
0002801AXILOCK TYPE IV EPDM RVS 316 500 MM
0002577AXILOCK TYPE IV EPDM RVS 316 508 MM

Teekay® Axilock Type I NBR

Teekay Axilock
(axially restrained)

The Teekay Axilock has two metallic anchor rings that dig into the pipe wall when the coupling is installed. This prevents the two pipes from pushing apart under pressure or pulling away under end-load.

Each coupling (whether Axilock or Axiflex) consists of a casing, a gasket and a lockpart. The purpose of the casing is to house the gasket and to press it onto the pipe surface when the lockpart is closed. The lockpart is designed to pull the two ends of the casing together circumferentially around the pipe. In order to achieve this, the coupling is labelled clearly with a torque figure which ensures that the gasket is compressed sufficiently against the pipe surface.

The Axilock has two anchor rings which are placed adjacent to, but separate from, the sealing mechanism. As the lockpart is tightened the sealing lips are pressed against the pipe surface to form a seal. At the same time the anchor rings penetrate the rubber, bite into the two pipes and prevent them from pulling apart, whether by external loading or internal pressure. The end seal is also pressed against the pipe surface, which protects both the anchor ring and the section of the pipe where the anchor rings have bitten, from any possible external corrosion.

Type I
Casing: AISI 304 / DIN 1.4301
Fasteners: Alloy Steel, Coated
Gasket: EPDM/NBR/H-NBR/FKM/VMQ

Type IV
Casing: AISI 316L / DIN 1.4404
Fasteners: AISI 316 / 316L
Gasket: EPDM/NBR/H-NBR/FKM/VMQ

Article nr.Description
0002833AXILOCK TYPE I NBR RVS 304 33,7 MM
0002612AXILOCK TYPE I NBR RVS 304 42,4 MM
0002606AXILOCK TYPE I NBR RVS 304 44,5 MM
0002219AXILOCK TYPE I NBR RVS 304 48,3 MM
0002607AXILOCK TYPE I NBR RVS 304 57 MM
0002595AXILOCK TYPE I NBR RVS 304 60,3 MM
0002608AXILOCK TYPE I NBR RVS 304 73 MM
0002609AXILOCK TYPE I NBR RVS 304 76,1 MM
0002601AXILOCK TYPE I NBR RVS 304 88,9 MM
0002610AXILOCK TYPE I NBR RVS 304 108 MM
0002602AXILOCK TYPE I NBR RVS 304 114,3 MM
0003817AXILOCK TYPE I NBR RVS 304 125 MM
0003652AXILOCK TYPE I NBR RVS 304 133 MM
0002605AXILOCK TYPE I NBR RVS 304 139,7 MM
0002964AXILOCK TYPE I NBR RVS 304 141,3 MM
0002590AXILOCK TYPE I NBR RVS 304 159 MM
0003448AXILOCK TYPE I NBR RVS 304 168,3 MM
0002613AXILOCK TYPE I NBR RVS 304 273 MM

 

Teekay® Axilock Type I EPDM

Teekay Axilock
(axially restrained)

The Teekay Axilock has two metallic anchor rings that dig into the pipe wall when the coupling is installed. This prevents the two pipes from pushing apart under pressure or pulling away under end-load.

Each coupling (whether Axilock or Axiflex) consists of a casing, a gasket and a lockpart. The purpose of the casing is to house the gasket and to press it onto the pipe surface when the lockpart is closed. The lockpart is designed to pull the two ends of the casing together circumferentially around the pipe. In order to achieve this, the coupling is labelled clearly with a torque figure which ensures that the gasket is compressed sufficiently against the pipe surface.

The Axilock has two anchor rings which are placed adjacent to, but separate from, the sealing mechanism. As the lockpart is tightened the sealing lips are pressed against the pipe surface to form a seal. At the same time the anchor rings penetrate the rubber, bite into the two pipes and prevent them from pulling apart, whether by external loading or internal pressure. The end seal is also pressed against the pipe surface, which protects both the anchor ring and the section of the pipe where the anchor rings have bitten, from any possible external corrosion.

Type I
Casing: AISI 304 / DIN 1.4301
Fasteners: Alloy Steel, Coated
Gasket: EPDM/NBR/H-NBR/FKM/VMQ

Type IV
Casing: AISI 316L / DIN 1.4404
Fasteners: AISI 316 / 316L
Gasket: EPDM/NBR/H-NBR/FKM/VMQ

Article nr.Description
0002572AXILOCK TYPE I EPDM RVS 304 33,7 MM
0003814AXILOCK TYPE I EPDM RVS 304 38 MM
0002627AXILOCK TYPE I EPDM RVS 304 40 MM
0002604AXILOCK TYPE I EPDM RVS 304 42,4 MM
0003102AXILOCK TYPE I EPDM RVS 304 44,5 MM
0002632AXILOCK TYPE I EPDM RVS 304 48,3 MM
0003285AXILOCK TYPE I EPDM RVS 304 57 MM
0002573AXILOCK TYPE I EPDM RVS 304 60,3 MM
0002680AXILOCK TYPE I EPDM RVS 304 63 MM
0003818AXILOCK TYPE I EPDM RVS 304 65 MM
0003675AXILOCK TYPE I EPDM RVS 304 70 MM
0002574AXILOCK TYPE I EPDM RVS 304 73 MM
0002626AXILOCK TYPE I EPDM RVS 304 76,1 MM
0002770AXILOCK TYPE I EPDM RVS 304 84 MM
0002625AXILOCK TYPE I EPDM RVS 304 88,9 MM
0002771AXILOCK TYPE I EPDM RVS 304 104 MM
0003284AXILOCK TYPE I EPDM RVS 304 108 MM
0004130AXILOCK TYPE I EPDM RVS 304 110 MM
0002646AXILOCK TYPE I EPDM RVS 304 114,3 MM
0003635AXILOCK TYPE I EPDM RVS 304 133 MM
0003349AXILOCK TYPE I EPDM RVS 304 139,7 MM
0002936AXILOCK TYPE I EPDM RVS 304 154 MM
0003288AXILOCK TYPE I EPDM RVS 304 159 MM
0003938AXILOCK TYPE I EPDM RVS 304 165,2 MM
0002685AXILOCK TYPE I EPDM RVS 304 168,3 MM
0003271AXILOCK TYPE I EPDM RVS 304 273 MM
0003709AXILOCK TYPE I EPDM RVS 304 323,9 MM

Cunifer pipes

Article nr.BD (in MM)DescriptionKG/M
000185010x1PIPE DIN 86019 CuNi90/10 LGT 6000 MM 0,25
000185112x1PIPE DIN 86019 CuNi90/10 LGT 6000 MM 0,31
000384214x1PIPE DIN 86019 CuNi90/10 LGT 6000 MM 0,36
000185216x1PIPE DIN 86019 CuNi90/10 LGT 6000 MM 0,42
000185420x1PIPE DIN 86019 CuNi90/10 LGT 6000 MM 0,53
000185520x1,50PIPE DIN 86019 CuNi90/10 LGT 6000 MM 0,80
000185625x1,50PIPE DIN 86019 CuNi90/10 LGT 6000 MM 0,99
000295325x2PIPE DIN 86019 CuNi90/10 LGT 6000 MM 1,32
000367828x1,50PIPE DIN 86019 CuNi90/10 LGT 6000 MM1,11
000185730x1,50PIPE DIN 86019 CuNi90/10 LGT 6000 MM 1,19
000397830x2PIPE DIN 86019 CuNi90/10 LGT 6000 MM 1,56
000206530x2,50PIPE DIN 86019 CuNi90/10 LGT 6000 MM 1,95
000185838x1,50PIPE DIN 86019 CuNi90/10 LGT 6000 MM 1,53
000185938x2PIPE DIN 86019 CuNi90/10 LGT 6000 MM 2,01
000186044,50x1,50PIPE DIN 86019 CuNi90/10 LGT 6000 MM 1,80
000186144,50x2PIPE DIN 86019 CuNi90/10 LGT 6000 MM 2,38
000206644,50x2,50PIPE DIN 86019 CuNi90/10 LGT 6000 MM 2,98
000365854x1,50PIPE DIN 86019 CuNi90/10 LGT 6000 MM 2,20
000186257x1,50PIPE DIN 86019 CuNi90/10 LGT 6000 MM 2,33
000186357x2PIPE DIN 86019 CuNi90/10 LGT 6000 MM 3,07
000206757x2,50PIPE DIN 86019 CuNi90/10 LGT 6000 MM 3,84
000398457x3PIPE DIN 86019 CuNi90/10 LGT 6000 MM 4,61
000186476,10x2PIPE DIN 86019 CuNi90/10 LGT 6000 MM 4,14
000186576,10x2,50PIPE DIN 86019 CuNi90/10 LGT 6000 MM 5,14
000186688,90x2PIPE DIN 86019 CuNi90/10 LGT 6000 MM 4,86
000186788,90x2,50PIPE DIN 86019 CuNi90/10 LGT 6000 MM 6,04
000245488,90x3PIPE DIN 86019 CuNi90/10 LGT 6000 MM 7,29
0001868108x2,50PIPE DIN 86019 CuNi90/10 LGT 6000 MM 7,37
0001869133x2,50PIPE DIN 86019 CuNi90/10 LGT 6000 MM 9,12
0002300159x3PIPE DIN 86019 CuNi90/10 LGT 6000 MM 13,08
0002510193,70x3PIPE DIN 86019 CuNi90/10 LGT 6000 MM 16,01
0001871219,10x3PIPE DIN 86019 CuNi90/10 LGT 6000 MM18,11
0001872219,10x3,50PIPE DIN 86019 CuNi90/10 LGT 6000 MM 21,08
0003146219,10x4PIPE DIN 86019 CuNi90/10 LGT 6000 MM 24,09
0003844219,10x4,50PIPE DIN 86019 CuNi90/10 LGT 6000 MM 27,10
0003612267x4PIPE DIN 86019 CuNi90/10 LGT 6000 MM 29,40
0001874323,90x4PIPE DIN 86019 CuNi90/10 LGT 6000 MM 35,77
0002277323,90x5PIPE DIN 86019 CuNi90/10 LGT 6000 MM 44,71
0001875419,10x4PIPE DIN 86019 CuNi90/10 LGT 6000 MM 46,39
0002509508x5PIPE DIN 86019 CuNi90/10 LGT 6000 MM 70,30

Cunifer elbows

Article nr.BD (in MM)Size (in inches)Description
000190020x11/2"ELBOW 90° DIN 86090 CuNi90/10
000190120x1,501/2"ELBOW 90° DIN 86090 CuNi90/10
000190225x1,503/4"ELBOW 90° DIN 86090 CuNi90/10
000190330x1,501"ELBOW 90° DIN 86090 CuNi90/10
000190430x21"ELBOW 90° DIN 86090 CuNi90/10
000190538x1,501 1/4"ELBOW 90° DIN 86090 CuNi90/10
000190744,50x1,501 1/2"ELBOW 90° DIN 86090 CuNi90/10
000365344,50x2,501 1/2"ELBOW 90° DIN 86090 CuNi90/10
000190957x1,502"ELBOW 90° DIN 86090 CuNi90/10
000191057x22"ELBOW 90° DIN 86090 CuNi90/10
000191176,10x22 1/2"ELBOW 90° DIN 86090 CuNi90/10
000191388,90x23"ELBOW 90° DIN 86090 CuNi90/10
000191488,90x2,503"ELBOW 90° DIN 86090 CuNi90/10
0002331108x2,504"ELBOW 90° DIN 86090 CuNi90/10
0001916133x2,505"ELBOW 90° DIN 86090 CuNi90/10
0001917159x2,506"ELBOW 90° DIN 86090 CuNi90/10
0004019159x36"ELBOW 90° DIN 86090 CuNi90/10
0001918219,10x38"ELBOW 90° DIN 86090 CuNi90/10
0004205219,10x48"ELBOW 90° DIN 86090 CuNi90/10
0002043219,10x4,508"ELBOW 90° DIN 86090 CuNi90/10
0001919267x310"ELBOW 90° DIN 86090 CuNi90/10
0001920323,90x412"ELBOW 90° DIN 86090 CuNi90/10

Other cunifer products

Article nr.DescriptionSize (in MM)
0001879 Collar DIN 86037 20x1
0002033 Collar DIN 86037 25x1
0002034Collar DIN 8603730x1
0002338Collar DIN 8603720x1,5
0001880Collar DIN 8603725x1,5
0001881Collar DIN 8603730x1,5
0001882Collar DIN 8603738x1,5
0001884Collar DIN 8603744,5x1,5
0001886Collar DIN 8603757x1,5
0001883Collar DIN 8603738x2
0001885Collar DIN 8603744,5x2
0001887Collar DIN 8603757x2
0001888Collar DIN 8603776,1x2
0001890Collar DIN 8603788,9x2
0002303Collar DIN 8603730x2,5
0002395Collar DIN 8603744,5x2,5
0002080Collar DIN 8603757x2,5
0001889Collar DIN 8603776,1x2,5
0001891Collar DIN 8603788,9x2,5
0001892Collar DIN 86037108x2,5
0001893Collar DIN 86037133x2,5
0001894Collar DIN 86037159x2,5
0002302Collar DIN 86037108x3
0002090Collar DIN 86037159x3
0001895Collar DIN 86037219,1x3
0001897Collar DIN 86037267x3
0001896Collar DIN 86037219,1x3,5
0001898Collar DIN 86037323,9x4
0001899Collar DIN 86037368x4
0002512Collar DIN 86037419,1x4
0002511Collar DIN 86037508x5
0001994Flange GALV DIN 2642 Steel 37.225
0002107Flange GALV DIN 2642 Steel 37.226,9
0001995Flange GALV DIN 2642 Steel 37.230
0001996Flange GALV DIN 2642 Steel 37.238
0001997Flange GALV DIN 2642 Steel 37.244,5
0001998Flange GALV DIN 2642 Steel 37.257
0002000Flange GALV DIN 2642 Steel 37.288,9
0002001Flange GALV DIN 2642 Steel 37.2108
0002003Flange GALV DIN 2642 Steel 37.2159
0002004Flange GALV DIN 2642 Steel 37.2219,1
0002005Flange GALV DIN 2642 Steel 37.2267
0002006Flange GALV DIN 2642 Steel 37.2323,9
0002473Hexagon nipples TBE1/2"xL = 48
0002474Hexagon nipples TBE3/4"xL = 52
0002475Hexagon nipples TBE1"xL = 60
0002476Hexagon nipples TBE1 1/4"xL = 72
0001922Red. conc. DIN 8608625/20x1,5/1
0001923Red. conc. DIN 8608630/16x1,5/1
0001924Red. conc. DIN 8608630/20x1,5/1
0001925Red. conc. DIN 8608630/25x1,5/1,5
0001926Red. conc. DIN 8608638/20x1,5/1
0001927Red. conc. DIN 8608638/20x2/1,5
0001928Red. conc. DIN 8608638/25x1,5/1,5
0001929Red. conc. DIN 8608638/25x2/1,5
0001930Red. conc. DIN 8608638/30x1,5/1,5
0001931Red. conc. DIN 8608638/30x2/1,5
0001932Red. conc. DIN 8608644,5/25x1,5/1,5
0001933Red. conc. DIN 8608644,5/25x2/1,5
0001934Red. conc. DIN 8608644,5/30x1,5/1,5
0001935Red. conc. DIN 8608644,5/30x2/1,5
0001936Red. conc. DIN 8608644,5/38x1,5/1,5
0001937Red. conc. DIN 8608644,5/38x2/2
0001938Red. conc. DIN 8608657/30x1,5/1,5
0001939Red. conc. DIN 8608657/30x2/1,5
0001940Red. conc. DIN 8608657/38x1,5/1,5
0001941Red. conc. DIN 8608657/38x2/2
0001942Red. conc. DIN 8608657/38x2,5/2,5
0001943Red. conc. DIN 8608657/44,5x1,5/1,5
0001944Red. conc. DIN 8608657/44,5x2/2
0001945Red. conc. DIN 8608676,1/38x2/1,5
0001946Red. conc. DIN 8608676,1/38x2,5/2
0001947Red. conc. DIN 8608676,1/44,5x2/1,5
0001948Red. conc. DIN 8608676,1/44,5x2,5/2
001949Red. conc. DIN 8608676,1/57x2,5/2
0001950Red. conc. DIN 8608688,9/44,5x2/1,5
0001951Red. conc. DIN 8608688,9/57x2/1,5
0001952Red. conc. DIN 8608688,9/57x2/2
0001953Red. conc. DIN 8608688,9/57x2,5/2
0001954Red. conc. DIN 8608688,9/76,1x2/2
0001955Red. conc. DIN 8608688,9/76,1x2,5/2,5
0001956Red. conc. DIN 86086108/57x2,5/1,5
0001957Red. conc. DIN 86086108/76,1x2,5/2
0001958Red. conc. DIN 86086108/88,9x2,5/2
0001961Red. conc. DIN 86086133/108x2,5/2,5
0001959Red. conc. DIN 86086133/76,1x2,5/2
0001960Red. conc. DIN 86086133/88,9x2,5/2
0001962Red. conc. DIN 86086159/108x2,5/2,5
0003010Red. conc. DIN 86086159/133x2,5/2,5
0001965Red. conc. DIN 86086219,1/133x3/2,5
0001967Red. conc. DIN 86086219,1/159x3/2,5
0001969Red. conc. DIN 86086267/159x3/2,5
0001970Red. conc. DIN 86086267/219,1x3/3
0002026Saddle equal DIN 8608757/57x1,5
002027Saddle equal DIN 8608788,9/88,9x2
002028Saddle equal DIN 86087108/108x2,5
002029Saddle equal DIN 86087159/159x2,5
0001975Tee equal DIN 8608825x1,5
0001976Tee equal DIN 8608830x1,5
0001977Tee equal DIN 8608838x1,5
0002921Tee equal DIN 8608844,5x2
0001981Tee equal DIN 8608857x2
0001982Tee equal DIN 8608876,1x2
0001984Tee equal DIN 8608888,9x2
0001985Tee equal DIN 8608888,9x2,5
0001986Tee equal DIN 86088108x2,5
0002305Tee equal DIN 86088108x3
0001987Tee equal DIN 86088133x2,5
0001988Tee equal DIN 86088159x2,5
0002304Tee equal DIN 86088159x3
0001989Tee equal DIN 86088219,1x3

Teekay® Axiflex Type IV NBR

Teekay Axiflex
(non axially restrained)

The Teekay Axiflex joins pipes that are already anchored. In this instance the pipeline forces do not have to be contained by the couplings. Therefore diameters up to 4 metres are possible with this design. The coupling can be placed over the pipe ends or supplied in a wrap – around version.

Each coupling (whether Axilock or Axiflex) consists of a casing, a gasket and a lockpart. The purpose of the casing is to house the gasket and to press it onto the pipe surface when the lockpart is closed. The lockpart is designed to pull the two ends of the casing together circumferentially around the pipe. In order to achieve this, the coupling is labelled clearly with a torque figure which ensures that the gasket is compressed sufficiently against the pipe surface.

The Axiflex has two thick sealing lips which allow for pipe expansion and contraction. The sealing lips press against the pipe surface and form lip seals. The lip seals are designed to resist the internal pressure in the pipes. As the pressure increases, the lip seals swell to seal more tightly against the pipe surface.


Type I
Casing: AISI 304 / DIN 1.4301
Fasteners: Alloy Steel, Coated
Gasket: EPDM/NBR/H-NBR/FKM/VMQ

Type IV
Casing: AISI 316L / DIN 1.4404
Fasteners: AISI 316 / 316L
Gasket: EPDM/NBR/H-NBR/FKM/VMQ

Article nr.Description
0004287AXIFLEX TYPE IV NBR RVS 316 30 MM
0004288AXIFLEX TYPE IV NBR RVS 316 35 MM
0003584AXIFLEX TYPE IV NBR RVS 316 48,3 MM
0004302AXIFLEX TYPE IV NBR RVS 316 50 MM
0002893AXIFLEX TYPE IV NBR RVS 316 60,3 MM
0004204AXIFLEX TYPE IV NBR RVS 316 76,1 MM
0003911AXIFLEX TYPE IV NBR RVS 316 82,5 MM
0002835AXIFLEX TYPE IV NBR RVS 316 88,9 MM
0003758AXIFLEX TYPE IV NBR RVS 316 106,4 MM
0004117AXIFLEX TYPE IV NBR RVS 316 108 MM
0003718AXIFLEX TYPE IV NBR RVS 316 144 MM
0002834AXIFLEX TYPE IV NBR RVS 316 256 MM
0003887AXIFLEX TYPE IV NBR RVS 316 273,1 MM
0004203AXIFLEX TYPE IV NBR RVS 316 304 MM
0003882AXIFLEX TYPE IV NBR RVS 316 323,9 MM
0004115AXIFLEX TYPE IV NBR RVS 316 354 MM
0003993AXIFLEX TYPE IV NBR RVS 316 530 MM

5 BAR 5754 H114 (pickled)

We provide all required dimensions cut to size with close tolerances as well as short and reliable delivery times.

Article nr.LBD (in MM)KG
00033802000x1000x3,5/520,680
00032242000x1000x5/6,528,780
00005402500x1250x5/6,544,970

Sockets

6060 T6.
Other sizes and alloys upon request.

Article nr.Size (in inches)
00012551/4"
00014201/3"
00011211/2"
00010493/4"
00010501"
00010861 1/4"
00011611 1/2"
00011452"
00011052 1/2"