Teekay® Axilock Type IV NBR

Teekay Axilock
(axially restrained)

The Teekay Axilock has two metallic anchor rings that dig into the pipe wall when the coupling is installed. This prevents the two pipes from pushing apart under pressure or pulling away under end-load.

Each coupling (whether Axilock or Axiflex) consists of a casing, a gasket and a lockpart. The purpose of the casing is to house the gasket and to press it onto the pipe surface when the lockpart is closed. The lockpart is designed to pull the two ends of the casing together circumferentially around the pipe. In order to achieve this, the coupling is labelled clearly with a torque figure which ensures that the gasket is compressed sufficiently against the pipe surface.

The Axilock has two anchor rings which are placed adjacent to, but separate from, the sealing mechanism. As the lockpart is tightened the sealing lips are pressed against the pipe surface to form a seal. At the same time the anchor rings penetrate the rubber, bite into the two pipes and prevent them from pulling apart, whether by external loading or internal pressure. The end seal is also pressed against the pipe surface, which protects both the anchor ring and the section of the pipe where the anchor rings have bitten, from any possible external corrosion.

Type I
Casing: AISI 304 / DIN 1.4301
Fasteners: Alloy Steel, Coated
Gasket: EPDM/NBR/H-NBR/FKM/VMQ

Type IV
Casing: AISI 316L / DIN 1.4404
Fasteners: AISI 316 / 316L
Gasket: EPDM/NBR/H-NBR/FKM/VMQ

Article Nr.Description
0003598AXILOCK TYPE IV NBR RVS 316 21,3 MM
0003687AXILOCK TYPE IV NBR RVS 316 25 MM
0002924AXILOCK TYPE IV NBR RVS 316 26,9 MM
0002544AXILOCK TYPE IV NBR RVS 316 30 MM
0002545AXILOCK TYPE IV NBR RVS 316 33,7 MM
0002546AXILOCK TYPE IV NBR RVS 316 38 MM
0003175AXILOCK TYPE IV NBR RVS 316 40 MM
0002547AXILOCK TYPE IV NBR RVS 316 42,4 MM
0002548AXILOCK TYPE IV NBR RVS 316 44,5 MM
0002549AXILOCK TYPE IV NBR RVS 316 48,3 MM
0004054AXILOCK TYPE IV NBR RVS 316 50 MM
0003138AXILOCK TYPE IV NBR RVS 316 54 MM
0002550AXILOCK TYPE IV NBR RVS 316 57 MM
0002551AXILOCK TYPE IV NBR RVS 316 60,3 MM
0004000AXILOCK TYPE IV NBR RVS 316 70 MM
0002552AXILOCK TYPE IV NBR RVS 316 73 MM
0002553AXILOCK TYPE IV NBR RVS 316 76,1 MM
0002554AXILOCK TYPE IV NBR RVS 316 88,9 MM
0002555AXILOCK TYPE IV NBR RVS 316 108 MM
0003636AXILOCK TYPE IV NBR RVS 316 110 MM
0002556AXILOCK TYPE IV NBR RVS 316 114,3 MM
0002557AXILOCK TYPE IV NBR RVS 316 139,7 MM
0002665AXILOCK TYPE IV NBR RVS 316 141,3 MM
0003976AXILOCK TYPE IV NBR RVS 316 159 MM
0002558AXILOCK TYPE IV NBR RVS 316 168,3 MM
0002559AXILOCK TYPE IV NBR RVS 316 219,1 MM
0004238AXILOCK TYPE IV NBR RVS 316 355,6 MM
0002527AXILOCK TYPE IV NBR RVS 316 368 MM

Teekay® Axilock Type IV EPDM

Teekay Axilock
(axially restrained)

The Teekay Axilock has two metallic anchor rings that dig into the pipe wall when the coupling is installed. This prevents the two pipes from pushing apart under pressure or pulling away under end-load.

Each coupling (whether Axilock or Axiflex) consists of a casing, a gasket and a lockpart. The purpose of the casing is to house the gasket and to press it onto the pipe surface when the lockpart is closed. The lockpart is designed to pull the two ends of the casing together circumferentially around the pipe. In order to achieve this, the coupling is labelled clearly with a torque figure which ensures that the gasket is compressed sufficiently against the pipe surface.

The Axilock has two anchor rings which are placed adjacent to, but separate from, the sealing mechanism. As the lockpart is tightened the sealing lips are pressed against the pipe surface to form a seal. At the same time the anchor rings penetrate the rubber, bite into the two pipes and prevent them from pulling apart, whether by external loading or internal pressure. The end seal is also pressed against the pipe surface, which protects both the anchor ring and the section of the pipe where the anchor rings have bitten, from any possible external corrosion.

Type I
Casing: AISI 304 / DIN 1.4301
Fasteners: Alloy Steel, Coated
Gasket: EPDM/NBR/H-NBR/FKM/VMQ

Type IV
Casing: AISI 316L / DIN 1.4404
Fasteners: AISI 316 / 316L
Gasket: EPDM/NBR/H-NBR/FKM/VMQ

Article Nr.Description
0004247AXILOCK TYPE IV EPDM RVS 316 21,3 MM
0003815AXILOCK TYPE IV EPDM RVS 316 25 MM
0002645AXILOCK TYPE IV EPDM RVS 316 26,90 MM
0003415AXILOCK TYPE IV EPDM RVS 316 28 MM
0002528AXILOCK TYPE IV EPDM RVS 316 30 MM
0003816AXILOCK TYPE IV EPDM RVS 316 32 MM
0002529AXILOCK TYPE IV EPDM RVS 316 33,70 MM
0002530AXILOCK TYPE IV EPDM RVS 316 38 MM
0002977AXILOCK TYPE IV EPDM RVS 316 40 MM
0002531AXILOCK TYPE IV EPDM RVS 316 42,4 MM
0002532AXILOCK TYPE IV EPDM RVS 316 44,5 MM
0002533AXILOCK TYPE IV EPDM RVS 316 48,3 MM
0002789AXILOCK TYPE IV EPDM RVS 316 50 MM
0002620AXILOCK TYPE IV EPDM RVS 316 54 MM
0004079AXILOCK TYPE IV EPDM RVS 316 55 MM
0002534AXILOCK TYPE IV EPDM RVS 316 57 MM
0002978AXILOCK TYPE IV EPDM RVS 316 60 MM
0002535AXILOCK TYPE IV EPDM RVS 316 60,3 MM
0002918AXILOCK TYPE IV EPDM RVS 316 63 MM
0002647AXILOCK TYPE IV EPDM RVS 316 67 MM
0002675AXILOCK TYPE IV EPDM RVS 316 70 MM
0002536AXILOCK TYPE IV EPDM RVS 316 73 MM
0002537AXILOCK TYPE IV EPDM RVS 316 76,1 MM
0003437AXILOCK TYPE IV EPDM RVS 316 84 MM
0002538AXILOCK TYPE IV EPDM RVS 316 88,9 MM
0003238AXILOCK TYPE IV EPDM RVS 316 98 MM
0003699AXILOCK TYPE IV EPDM RVS 316 100 MM
0002892AXILOCK TYPE IV EPDM RVS 316 101,6 MM
0002652AXILOCK TYPE IV EPDM RVS 316 104 MM
0002539AXILOCK TYPE IV EPDM RVS 316 108 MM
0002540AXILOCK TYPE IV EPDM RVS 316 114,3 MM
0003221AXILOCK TYPE IV EPDM RVS 316 129 MM
0002541AXILOCK TYPE IV EPDM RVS 316 139,7 MM
0003457AXILOCK TYPE IV EPDM RVS 316 141,3 MM
0003416AXILOCK TYPE IV EPDM RVS 316 154 MM
0002701AXILOCK TYPE IV EPDM RVS 316 159 MM
0003590AXILOCK TYPE IV EPDM RVS 316 165 MM
0002542AXILOCK TYPE IV EPDM RVS 316 168,3 MM
0004128AXILOCK TYPE IV EPDM RVS 316 180 MM
0002797AXILOCK TYPE IV EPDM RVS 316 200 MM
0002874AXILOCK TYPE IV EPDM RVS 316 204 MM
0002543AXILOCK TYPE IV EPDM RVS 316 219,1 MM
0003264AXILOCK TYPE IV EPDM RVS 316 250 MM
0002723AXILOCK TYPE IV EPDM RVS 316 254 MM
0002812AXILOCK TYPE IV EPDM RVS 316 256 MM
0003711AXILOCK TYPE IV EPDM RVS 316 260 MM
0002824AXILOCK TYPE IV EPDM RVS 316 267 MM
0003521AXILOCK TYPE IV EPDM RVS 316 267 MM
0002780AXILOCK TYPE IV EPDM RVS 316 273 MM
0003417AXILOCK TYPE IV EPDM RVS 316 304 MM
0003196AXILOCK TYPE IV EPDM RVS 316 323,9 MM
0002825AXILOCK TYPE IV EPDM RVS 316 323,90 MM
0003529AXILOCK TYPE IV EPDM RVS 316 355,6 MM
0002840AXILOCK TYPE IV EPDM RVS 316 355,60 MM
0003030AXILOCK TYPE IV EPDM RVS 316 368,00 MM
0003607AXILOCK TYPE IV EPDM RVS 316 406,4 MM
0002801AXILOCK TYPE IV EPDM RVS 316 500 MM
0002577AXILOCK TYPE IV EPDM RVS 316 508 MM

Teekay® Axilock Type I NBR

Teekay Axilock
(axially restrained)

The Teekay Axilock has two metallic anchor rings that dig into the pipe wall when the coupling is installed. This prevents the two pipes from pushing apart under pressure or pulling away under end-load.

Each coupling (whether Axilock or Axiflex) consists of a casing, a gasket and a lockpart. The purpose of the casing is to house the gasket and to press it onto the pipe surface when the lockpart is closed. The lockpart is designed to pull the two ends of the casing together circumferentially around the pipe. In order to achieve this, the coupling is labelled clearly with a torque figure which ensures that the gasket is compressed sufficiently against the pipe surface.

The Axilock has two anchor rings which are placed adjacent to, but separate from, the sealing mechanism. As the lockpart is tightened the sealing lips are pressed against the pipe surface to form a seal. At the same time the anchor rings penetrate the rubber, bite into the two pipes and prevent them from pulling apart, whether by external loading or internal pressure. The end seal is also pressed against the pipe surface, which protects both the anchor ring and the section of the pipe where the anchor rings have bitten, from any possible external corrosion.

Type I
Casing: AISI 304 / DIN 1.4301
Fasteners: Alloy Steel, Coated
Gasket: EPDM/NBR/H-NBR/FKM/VMQ

Type IV
Casing: AISI 316L / DIN 1.4404
Fasteners: AISI 316 / 316L
Gasket: EPDM/NBR/H-NBR/FKM/VMQ

Article Nr.Description
0002833AXILOCK TYPE I NBR RVS 304 33,7 MM
0002612AXILOCK TYPE I NBR RVS 304 42,4 MM
0002606AXILOCK TYPE I NBR RVS 304 44,5 MM
0002219AXILOCK TYPE I NBR RVS 304 48,3 MM
0002607AXILOCK TYPE I NBR RVS 304 57 MM
0002595AXILOCK TYPE I NBR RVS 304 60,3 MM
0002608AXILOCK TYPE I NBR RVS 304 73 MM
0002609AXILOCK TYPE I NBR RVS 304 76,1 MM
0002601AXILOCK TYPE I NBR RVS 304 88,9 MM
0002610AXILOCK TYPE I NBR RVS 304 108 MM
0002602AXILOCK TYPE I NBR RVS 304 114,3 MM
0003817AXILOCK TYPE I NBR RVS 304 125 MM
0003652AXILOCK TYPE I NBR RVS 304 133 MM
0002605AXILOCK TYPE I NBR RVS 304 139,7 MM
0002964AXILOCK TYPE I NBR RVS 304 141,3 MM
0002590AXILOCK TYPE I NBR RVS 304 159 MM
0003448AXILOCK TYPE I NBR RVS 304 168,3 MM
0002613AXILOCK TYPE I NBR RVS 304 273 MM

 

Teekay® Axilock Type I EPDM

Teekay Axilock
(axially restrained)

The Teekay Axilock has two metallic anchor rings that dig into the pipe wall when the coupling is installed. This prevents the two pipes from pushing apart under pressure or pulling away under end-load.

Each coupling (whether Axilock or Axiflex) consists of a casing, a gasket and a lockpart. The purpose of the casing is to house the gasket and to press it onto the pipe surface when the lockpart is closed. The lockpart is designed to pull the two ends of the casing together circumferentially around the pipe. In order to achieve this, the coupling is labelled clearly with a torque figure which ensures that the gasket is compressed sufficiently against the pipe surface.

The Axilock has two anchor rings which are placed adjacent to, but separate from, the sealing mechanism. As the lockpart is tightened the sealing lips are pressed against the pipe surface to form a seal. At the same time the anchor rings penetrate the rubber, bite into the two pipes and prevent them from pulling apart, whether by external loading or internal pressure. The end seal is also pressed against the pipe surface, which protects both the anchor ring and the section of the pipe where the anchor rings have bitten, from any possible external corrosion.

Type I
Casing: AISI 304 / DIN 1.4301
Fasteners: Alloy Steel, Coated
Gasket: EPDM/NBR/H-NBR/FKM/VMQ

Type IV
Casing: AISI 316L / DIN 1.4404
Fasteners: AISI 316 / 316L
Gasket: EPDM/NBR/H-NBR/FKM/VMQ

Article Nr.Description
0002572AXILOCK TYPE I EPDM RVS 304 33,7 MM
0003814AXILOCK TYPE I EPDM RVS 304 38 MM
0002627AXILOCK TYPE I EPDM RVS 304 40 MM
0002604AXILOCK TYPE I EPDM RVS 304 42,4 MM
0003102AXILOCK TYPE I EPDM RVS 304 44,5 MM
0002632AXILOCK TYPE I EPDM RVS 304 48,3 MM
0003285AXILOCK TYPE I EPDM RVS 304 57 MM
0002573AXILOCK TYPE I EPDM RVS 304 60,3 MM
0002680AXILOCK TYPE I EPDM RVS 304 63 MM
0003818AXILOCK TYPE I EPDM RVS 304 65 MM
0003675AXILOCK TYPE I EPDM RVS 304 70 MM
0002574AXILOCK TYPE I EPDM RVS 304 73 MM
0002626AXILOCK TYPE I EPDM RVS 304 76,1 MM
0002770AXILOCK TYPE I EPDM RVS 304 84 MM
0002625AXILOCK TYPE I EPDM RVS 304 88,9 MM
0002771AXILOCK TYPE I EPDM RVS 304 104 MM
0003284AXILOCK TYPE I EPDM RVS 304 108 MM
0004130AXILOCK TYPE I EPDM RVS 304 110 MM
0002646AXILOCK TYPE I EPDM RVS 304 114,3 MM
0003635AXILOCK TYPE I EPDM RVS 304 133 MM
0003349AXILOCK TYPE I EPDM RVS 304 139,7 MM
0002936AXILOCK TYPE I EPDM RVS 304 154 MM
0003288AXILOCK TYPE I EPDM RVS 304 159 MM
0003938AXILOCK TYPE I EPDM RVS 304 165,2 MM
0002685AXILOCK TYPE I EPDM RVS 304 168,3 MM
0003271AXILOCK TYPE I EPDM RVS 304 273 MM
0003709AXILOCK TYPE I EPDM RVS 304 323,9 MM